20-03-19, 11:08 AM
(This post was last modified: 20-03-19, 11:09 AM by 74eldiablo.)
Ive just put some 15w oil in my 2001 forks with pre load adjusters.
465ml measured out correctly.
Pumped the forks to release air bubbles.
After 10 minutes each leg sitting i measured the air gap
It was way off the specified 132mm (at least 15 > 20mm off)
Should i add more oil to make the air gap the correct height or just leave the measured out 465ml
Thanks
465ml measured out correctly.
Pumped the forks to release air bubbles.
After 10 minutes each leg sitting i measured the air gap
It was way off the specified 132mm (at least 15 > 20mm off)
Should i add more oil to make the air gap the correct height or just leave the measured out 465ml
Thanks