02-03-19, 09:20 PM
(02-03-19, 07:57 PM)unfazed link Wrote: Unfortunately I have very little info on the Bronze version as I did all my research on the silver one. The bronze one would have made the rear to high for me and I opted for the later updated model which is slightly shorter. Raised the rear 10mm whereas the bronze would have raised it closer to 20mm.The stock setting of the s1000rr was what I used as a base line and but for my 89kg in full gear it was slightly to soft and i upped the standard settings one notch.
The standard settings for the Bronze shock are
Rebound Adjuster on Fork is 4Low speed compression Inner adjuster is 4High speed compression Outer adjuster is 6
Would be a good base setting
Be cautious with the CBR1000RR shock as not all will fit are are about 10Kg, I think the physical size you need is 55-155-75 this will not fit the Silver one as it is 55-155-80
Cheers for the reply
From searching and reading on the US forum/cbr forums I have seen that the early cbr spring is 12kg and this bmw shock is 9.5kg
I’ve come from a tracer so the higher seat will suit me, plus it feels low to me at the moment. I come from a mx background and prefer tall bikes
So yeah, just hope my research on the cbr spring is correct