27-01-19, 06:22 PM
I never had occasion to alter the idle adjuster to get a TPS unit to give the full range of 0 to 10k readings. I have done a few over the years, too. 
Like I said above, you do need to persist sometimes to get the unit to do what it should and you might need to jiggle it quite firmly in both directions to achieve this.
However, if your TPS really won't cooperate but you can get an acceptable voltage reading as per the Haynes Manual, I'd settle for that and call it a day.
Like I said above, you do need to persist sometimes to get the unit to do what it should and you might need to jiggle it quite firmly in both directions to achieve this.
However, if your TPS really won't cooperate but you can get an acceptable voltage reading as per the Haynes Manual, I'd settle for that and call it a day.