Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cylinder 3 misfire at low revs
#2
Oh also.


I reset all pilot screws to 2 turns out. They were 2 & 5/8 , 1. & 5/8, 2&1/8, 2&1/8. I did this during second carb removal as the original plugs were all a bit dark.


The bike which I bought new in 2002, has never required choke to start which I was told is fairly normal, but does seem odd.


It had been sitting in the garage for sometime so carbs did seem the most likely. I possibly should have ditched the old fuel and cleaned out the tank fully.
Reply


Messages In This Thread
Re: Cylinder 3 misfire at low revs - by Whomightyoube - 09-11-18, 06:59 PM
Re: Cylinder 3 misfire at low revs - by Trebus - 09-11-18, 09:29 PM
Re: Cylinder 3 misfire at low revs - by limax2 - 09-11-18, 09:35 PM
Re: Cylinder 3 misfire at low revs - by ogri48 - 10-11-18, 12:02 AM
Re: Cylinder 3 misfire at low revs - by darrsi - 10-11-18, 01:29 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)