Steering stem is the only original part that's used from the Fazer. However I did put in a new set of tapered headrace bearings.
Lower triple tree/clamp was taken from the SuperSport bike, that had to be machined a little, so it could be pressed into the FZS600 Stem.
Top yoke is a custom solid billet CNC Yoke, along with the handlebar risers, actually designed for the SuperSport bike (to fit the larger diameter USD forks).
It would be possible to use the SuperSport original top yoke, perhaps requiring spacers, if you planned on also using the Sport bike Clip-Ons, for a sports / Café racer style conversion. 8)
![[Image: 29591595627_4549ebbe93_c.jpg]](https://farm2.staticflickr.com/1873/29591595627_4549ebbe93_c.jpg)
Lower triple tree/clamp was taken from the SuperSport bike, that had to be machined a little, so it could be pressed into the FZS600 Stem.
Top yoke is a custom solid billet CNC Yoke, along with the handlebar risers, actually designed for the SuperSport bike (to fit the larger diameter USD forks).
It would be possible to use the SuperSport original top yoke, perhaps requiring spacers, if you planned on also using the Sport bike Clip-Ons, for a sports / Café racer style conversion. 8)