29-08-18, 06:33 AM
Do the above sooner rather than later, otherwise you really will burn the clutch plates out.
Invest in a deep set 12mm ring spanner to make the job of adjusting the clutch at the bottom end much easier in the future.
Also if you've not adjusted the lower clutch cable before you might wanna borrow a 6 sided 12mm socket rather than a 12 point one to initially undo the nut, to avoid rounding it off. The nut needs a bit of a crack to undo it and a 6 sided nut does the job much more efficiently.
https://www.ebay.co.uk/itm/Heavy-Duty-Me...5UX1xvlAOA
Invest in a deep set 12mm ring spanner to make the job of adjusting the clutch at the bottom end much easier in the future.
Also if you've not adjusted the lower clutch cable before you might wanna borrow a 6 sided 12mm socket rather than a 12 point one to initially undo the nut, to avoid rounding it off. The nut needs a bit of a crack to undo it and a 6 sided nut does the job much more efficiently.
https://www.ebay.co.uk/itm/Heavy-Duty-Me...5UX1xvlAOA
More people are born because of alcohol than will ever die from it.