30-07-18, 07:00 PM
Hel got back to me and said they don't have info on these bars so I should mesure the length needed and tell them which is fair enough. Thought they might have a database but that's not the case.
I had a fiddle today and lowered the bike down the forks by 9mm. I've noticed as I've got two fazer1000's one with the R6 shock mod and one without that side by side the stock bike rides a bit higher at the back end so once I swap the shock over to the R6 one that will lower the back and probably give me similar geometry to what I had before dropping the 9mm on the front.
I also moved the throttle in by a mm or two and left a mm or two gap between the brake and the throttle and this seems to've given me enough slack to not need new lines thank foc!
I had a fiddle today and lowered the bike down the forks by 9mm. I've noticed as I've got two fazer1000's one with the R6 shock mod and one without that side by side the stock bike rides a bit higher at the back end so once I swap the shock over to the R6 one that will lower the back and probably give me similar geometry to what I had before dropping the 9mm on the front.
I also moved the throttle in by a mm or two and left a mm or two gap between the brake and the throttle and this seems to've given me enough slack to not need new lines thank foc!