Front fork springs.

[5LV]

Can you remember what your ore load was set to. I'm running the same springs with 5w oil.

[quote author=5LV link=topic=24302.msg282494#msg282494 date=1532886095]
My $0.02.
From memory 10w oil is too thick.
I ran 9.5 springs with 2.5/5w mix. Rebound was on max and compression was backed right off to 3 or 4 clicks.
Everybody who rode it always said it was compliant.
The standard forks upgraded are reasonably useful bits of kit, but take a bit of time to set up.

[/quote]
I take it you mean pre load.
Preload only sets the ride height (sag) on your forks so is subjective to each rider.
However I had my forks dropped 15mm and 25mm of sag. Really getting on the brakes (stoppie) would leave @ 20mm of fork travel left. Hth