27-06-18, 07:26 PM
(27-06-18, 05:37 PM)kebab19 link Wrote: You need to loosen both, but first you'll need some way to support the front of the bike up off the ground. If you don't have a front paddock stand that goes underneath the bottom yoke, you can get away with a trolley jack & plank of thick wood under the header pipes.:agree I used my car jack to support the weight of the front of the bike, loosened the bolts then lowered the bike down the forks to where I wanted it using the jack. Highly recommend this free mod to anyone as it will noticeably improve the bikes handling, as will a 25mm Jack-up kit if you're not too short of leg.