26-05-18, 03:14 PM
this is what i did cleaned carbs out check pilot settings most where out some by 2 turns seated them and then turn out two turns got carbs back on bike set tps sensor.... then put on my gauges and balanced 1/2 then 3/4 then between 1/2 and 3/4 got them all level when blipping throttle.... but i forgot to set idle after wards so today i warm her up to running temp and adjust the idle screw on thing was it wouldnt turn any further i got it to 1000 -1100 rpm but it will not turn any further up it will only drop it down loads till it stalls