09-05-18, 08:54 PM
Started with an Oil & Filter change, new spark plugs (these had done 25K +), fitted a pair of PR4's and finished with a general spruce up.
Gave it a good check over and will be needing a chain & sprockets at the end of the year (it will have covered 20K + by then :'( ) and more than likely remove all the brake calipers, clean and reseal as required and new brake fluid. Also on the cards will be an EXUP service. It functions and operates correctly, but is a little rattlely when "blipping".
Spark plugs were a little fiddly, but I've still got the AIS fitted. Nothing that a 1/4" socket set couldn't cope with though. Found that by raising the tank, I could use an extension with a 14mm socket mated to the Yamaha supplied spark plug tool - simples.
Out tomorrow to scrub in the new rubber.
Gave it a good check over and will be needing a chain & sprockets at the end of the year (it will have covered 20K + by then :'( ) and more than likely remove all the brake calipers, clean and reseal as required and new brake fluid. Also on the cards will be an EXUP service. It functions and operates correctly, but is a little rattlely when "blipping".
Spark plugs were a little fiddly, but I've still got the AIS fitted. Nothing that a 1/4" socket set couldn't cope with though. Found that by raising the tank, I could use an extension with a 14mm socket mated to the Yamaha supplied spark plug tool - simples.
Out tomorrow to scrub in the new rubber.