01-05-18, 09:43 PM
The Mounting plate can wear on the inside and can cause side play and a bit of noise, however it does not effect the operation of the valve. Mine is worn enough and has a ridge, but works fine. (40000miles). Last time mine was rattling it was because I had to much slack in the cables.
The bush in the mounting plate is very easily removed, but be aware it is pushed out from the inside. I remove them using a vice and either 9 or10mm socket (cannot remember which) on the inside and a 21 mm on the outside. Bushes are around £45 each. It will do no harm to replace it. The plate is around £125
The bush in the mounting plate is very easily removed, but be aware it is pushed out from the inside. I remove them using a vice and either 9 or10mm socket (cannot remember which) on the inside and a 21 mm on the outside. Bushes are around £45 each. It will do no harm to replace it. The plate is around £125