Swapping to FZS400 reflectors

[Clampy]

Thanks for all the help guys. Apologies for not replying sooner (just started a new job). Have swapped the reflectors after much swearing and they seem to fit but will need to be pointed a bit higher (wish I’d measured their old positions first as suggested..oops). The 400 loom matched regarding connections but were mixed-up in operation, full beam and dipped on at once on one side in the dipped position. Think I’ll stick with the original and do the mod; that way I’ll retain the feed for the sidelight. Another thing I overlooked was the sidelight position. The reflectors project further forward so I will need to either trim back the RH side or reposition the holder further forward. It’s proving a bit of a pain but I’ll get there in the end; hopefully!!
Any other suggestions would be gratefully received and I hope to get back to you sooner this time.
Cheers