16-03-18, 10:18 PM
Wire wool will do it no harm, the emulator and then the spring plus the spacer and spacer top washer/disk sit on top of it.
Don't forget to put the small rebound spring on the damper rods before fitting the rods back in the lower legs/sliders.
Make sure your fork seals are good and not weeping if they are OK then the sliders do not need to be removed from the stanchion.
Sounds like your cracking on with it, well done.
Don't forget to put the small rebound spring on the damper rods before fitting the rods back in the lower legs/sliders.
Make sure your fork seals are good and not weeping if they are OK then the sliders do not need to be removed from the stanchion.
Sounds like your cracking on with it, well done.