16-03-18, 03:47 PM
Thanks darrsi.
I am going to buy that one that you send me. Thanks for that.
I kind thinking that that rubber ring could not be possibly be part of the carb. because when i removed it if fits on the TPS but it leaves a 3mm gap from where it sits on the TPS and the end of bottom of the TPS if you know what i mean. So when i connect it to the carb that 3mm gap wont fit properly as the rubber does not pass the edge of the role where the TPS sits so the TPS is not flushed with the carb and to do so causes a lot pressure on the screws and locks the butterflies.
see images
First one is the TPS without the rubber and without screw in. See how it fits perfectly. and if i tied the screws the spring snap back closed the vents.
Second shows the TPS with the rubber on. you see where it sits and the gap it leaves.
Third on is the TPS with the rubber connected to the carb. See the cap and to make it flush there is to be a quite pressure when screwing the tps in place.
:'(
I am going to buy that one that you send me. Thanks for that.
I kind thinking that that rubber ring could not be possibly be part of the carb. because when i removed it if fits on the TPS but it leaves a 3mm gap from where it sits on the TPS and the end of bottom of the TPS if you know what i mean. So when i connect it to the carb that 3mm gap wont fit properly as the rubber does not pass the edge of the role where the TPS sits so the TPS is not flushed with the carb and to do so causes a lot pressure on the screws and locks the butterflies.
see images
First one is the TPS without the rubber and without screw in. See how it fits perfectly. and if i tied the screws the spring snap back closed the vents.
Second shows the TPS with the rubber on. you see where it sits and the gap it leaves.
Third on is the TPS with the rubber connected to the carb. See the cap and to make it flush there is to be a quite pressure when screwing the tps in place.
:'(