16-03-18, 02:49 PM
Hey all!
Update news!
First i think the TPS is spring preloaded as when i rotate it using a screwdriver and let it go it snaps back into the original position. Second, it only rotates to one direction.
while i was trying it out again, and removed the TPS i noticed that this little o ring rubber came on with the TPS. This rubber was located inside of the carb where the TPS connects to. When i tried without it i had no issues and the TPS seems to snaggle into place very well. With the rubber on, it does not attach properly and before screw the TPS in there is about 3mm cap between the TPS and the carb. See pictures
Any ideas what this rubber is for?
cheers
Update news!
First i think the TPS is spring preloaded as when i rotate it using a screwdriver and let it go it snaps back into the original position. Second, it only rotates to one direction.
while i was trying it out again, and removed the TPS i noticed that this little o ring rubber came on with the TPS. This rubber was located inside of the carb where the TPS connects to. When i tried without it i had no issues and the TPS seems to snaggle into place very well. With the rubber on, it does not attach properly and before screw the TPS in there is about 3mm cap between the TPS and the carb. See pictures
Any ideas what this rubber is for?
cheers