12-03-18, 03:51 PM
Hey Guys.
I just went home for lunch and decided to have another look. while i was contemplating what would be causing this issue a light bulb come on. Could it be the TPS as i had changed it.
So i removed it from the carbs and bingo! the spring snapped back.
I then put it back on and did not tied the TPS screws as much as it was before and they still snapping back.
So now i will have to reset the TPS but and try not to tie the screws too much.
Strange one
Good thing is that is not the springs that is the problem. But i am afraid that when i put the carbs back and reset the TPS this will happen again as I remember that i had to tied the screws in such way as to have a 5000 RPM steady reading.
Thanks for your help and i will let you know once i have put it back on the bike.
adasilva
I just went home for lunch and decided to have another look. while i was contemplating what would be causing this issue a light bulb come on. Could it be the TPS as i had changed it.
So i removed it from the carbs and bingo! the spring snapped back.
I then put it back on and did not tied the TPS screws as much as it was before and they still snapping back.
So now i will have to reset the TPS but and try not to tie the screws too much.
Strange one
Good thing is that is not the springs that is the problem. But i am afraid that when i put the carbs back and reset the TPS this will happen again as I remember that i had to tied the screws in such way as to have a 5000 RPM steady reading.
Thanks for your help and i will let you know once i have put it back on the bike.
adasilva