07-01-18, 08:53 PM
Yes moving it up covers the reflector, I do actually have one fitted but it is not shown in the picture it is one of these https://www.mandp.co.uk/reflector-30x84m...lt-on.html and sits tight up against the bottom of the plate in the middle and is held in place whit a short bracket. Its bolted to the bracket with its own inbuilt bolt and one hole in the mudguard behind the plate.
when I moved up the plate I then cut off the bottom of the guard flush with the plate I used the same holes in the guard to mount the plate and brought a new plate and drilled new holes in the correct place to match
when I moved up the plate I then cut off the bottom of the guard flush with the plate I used the same holes in the guard to mount the plate and brought a new plate and drilled new holes in the correct place to match
I don't do rain or threat there of. dry rider only with no shame.