10-06-19, 04:20 PM
Exup blowing - carefully undo the outer cover 3 bolts - which are mild steel from new and prone to shearing - and see whether you can determine where the gasses are escaping and post back to us. There's a wealth of exup knowledge on here but it is a weak point on these bikes until sorted and regularly serviced. Replace with stainless screws if not already done....
Clutch - this could be a worn clutch but best to check the simple things first - try adjusting the cable. If that doesn't fix it then changing the cable might. Genuine cables are relatively expensive but after market cables are not worth the packaging they come in.
Hope this helps.
is it clean enough?