12-10-17, 05:03 PM
(This post was last modified: 12-10-17, 05:21 PM by fazersharp.)
I have mine on a small bracket bolted in the centre of the mud guard about 1 inch up from the bottom edge which is cut flush with the lifted numberplate. On the bolt secured with a wing nut the bracket and reflector can swivel up behind the guard and when in the down potion is at the correct angle as the bracket is bent like that.
Because I am a good boy :angel the bracket and reflector stay in the down position but if you want to break the law you could leave it swiveled up out of sight all year round and pop it down for the mot
Carnt be arsed to go out and take a picture so here it is partly photoshopped you can see the bracket and butterfly nut. And the dodgy picture also shows it folded up
The reflector is like this https://www.mandp.co.uk/reflector-30x84m...lt-on.html
So all you need is a strip of metal and a wing nut
Because I am a good boy :angel the bracket and reflector stay in the down position but if you want to break the law you could leave it swiveled up out of sight all year round and pop it down for the mot
Carnt be arsed to go out and take a picture so here it is partly photoshopped you can see the bracket and butterfly nut. And the dodgy picture also shows it folded up
The reflector is like this https://www.mandp.co.uk/reflector-30x84m...lt-on.html
So all you need is a strip of metal and a wing nut
I don't do rain or threat there of. dry rider only with no shame.