11-10-17, 11:07 PM
I've followed this chap's plastic welding plan in the past:
https://www.youtube.com/watch?v=k7GRNvPSf7k
Pretty straight forward, soldering iron, staples and cable tie job. Certainly functional, but not aesthetically pleasing. Fine for an out of sight mounting lug mind. However, if you have the piece of fairing handy, or its just a crack, you may be able to use this technique to seal the piece together from inside and leave only a fine hair line on show. Either way, probably a better plan than glueing.
Depending on how much you want to throw at the project, do note a brand new fairing can be had fully painted from Yamaha or Fowlers for £200 ish.
https://www.youtube.com/watch?v=k7GRNvPSf7k
Pretty straight forward, soldering iron, staples and cable tie job. Certainly functional, but not aesthetically pleasing. Fine for an out of sight mounting lug mind. However, if you have the piece of fairing handy, or its just a crack, you may be able to use this technique to seal the piece together from inside and leave only a fine hair line on show. Either way, probably a better plan than glueing.
Depending on how much you want to throw at the project, do note a brand new fairing can be had fully painted from Yamaha or Fowlers for £200 ish.