18-09-17, 07:16 AM
Can anybody tell if the pin (with the notch at the top) that you see when you take the clutch cover off, the one held by the cover that is bolted in with the six screws and clutch springs, should be tight in its hole?
Mine was very sloppy and whilst I thought it cant be right I refitted it and the bike broke down on the way to work. There is not enough movement of the lever the cable connects to on top of the clutch housing and I wonder if the pin has moved to one side. Thanks
Mine was very sloppy and whilst I thought it cant be right I refitted it and the bike broke down on the way to work. There is not enough movement of the lever the cable connects to on top of the clutch housing and I wonder if the pin has moved to one side. Thanks