(12-09-17, 08:07 AM)Fazer99 link Wrote: [quote author=vinnyb link=topic=17296.msg267853#msg267853 date=1505141986]
Thanks for the comments guys, absolutely right about the fitting F4aceless and I think they do look kinda cool. The only problem with fitting was on the left side bottom rail clamp which is only 25mm diameter, the right side is 30mm with a rubber lining which won't fit on the left side due to the closeness of the frame to the sump, because the 25mm clamp doesn't have a rubber lining, it's metal to metal contact on the frame which I wasn't happy with. However, I bought a piece of 1.5mm thick black rubber a couple of years ago to make some fairing washers for my VFR750, so I cut a strip to go inside the clamp but then needed a longer bolt cos I couldn't get the nut on the one they supplied :lol Still all good now, and at £83 well worth the money I reckon. It's good to hear that the engine bars do the job Fazer99 even though your baby was written off
I found the biggest problem fitting them was the lack of length of the bolts for the clamps around the frame but luckly I had some longer bolts to rectify that problem.
[/quote]
I went up from 25 to 30mm bolts on mine. Did you put anything between the left side clamp and the frame tube?