02-09-17, 10:43 AM
(This post was last modified: 02-09-17, 10:47 AM by fazersharp.)
google bar end weight pictures and you will see and get the idea - its not quite the same as the bike stem in your picture .
Some are a rubber choler that gets expanded when the wedge gets pulled up inside it in which case the rubber could of stuck itself to the inside of the bar. Undoing the bolt can just leave the wedge - wedged in there so you need to tap out the wedge to release the pressure.
Some are a rubber choler that gets expanded when the wedge gets pulled up inside it in which case the rubber could of stuck itself to the inside of the bar. Undoing the bolt can just leave the wedge - wedged in there so you need to tap out the wedge to release the pressure.
I don't do rain or threat there of. dry rider only with no shame.