21-08-17, 07:56 AM
I recently sold my R1 converted Fazer and got another with std forks. I have pulled the forks up the yokes 25mm and it is much better than standard for me. You can get them further up but at some point they will touch the handlebars depending on how much preload you have on.
On my R1 fork conversion I also cut 12mm extra thread on the stem and cut the last 12mm off rather than make a top hat spacer. The only difference then is the handlebars are 12mm lower than the more conventional conversion. I ended up pulling the R1 forks 10mm up anyway to get it a little lower.
On my R1 fork conversion I also cut 12mm extra thread on the stem and cut the last 12mm off rather than make a top hat spacer. The only difference then is the handlebars are 12mm lower than the more conventional conversion. I ended up pulling the R1 forks 10mm up anyway to get it a little lower.
Intentionally left blank