05-08-17, 09:41 PM
I hope you didn’t make the standard error of putting the pressure plate on wrong, but the symptoms point that way..
It seems easy to get it slotted on and the screws go in OK, but if you’re unlucky it’s not actually on the correct way… tighten the screws up and they break the bottom of the wells the springs live in and you get no pressure to the plates. The plate needs to go on such that when gentle pressure is applied by hand, the plates are squeezed. If you’re able to wiggle them while pressing on the plate, take the it off and rotate it a sixth of a turn then try again.