29-07-17, 07:23 PM
Is there not enough stub left to get any thread on at all?
If you are using M6 bolts to cap the ais off then if you can get 6mm of full thread cut with the tap the bolt will be secure with a bit of loctite, just shorten the bolt to suit the length of thread cut.
I have always found chemical metal a bit hit or miss.
If you are using M6 bolts to cap the ais off then if you can get 6mm of full thread cut with the tap the bolt will be secure with a bit of loctite, just shorten the bolt to suit the length of thread cut.
I have always found chemical metal a bit hit or miss.