Need advice cracked manifold and speed wobble under acleration in 3/4 gear

[Gnasher]

RIGHT the bike revs stay as they are roughly even when pulling acelorator its seams to struggle then bike starts to wobble if the bike was reving but going slowly it would be the clutch no friction from plates means no go but thats not what i said

i said its loosing power between 3/4 gear when acelerating then it starts to wobble

IT ONLY WOBBLES WHEN ACELORATING IN 3/4 GEAR NO OTHER TIMES

Mate you clearly have limited knowledge of how bikes work hence my questions.  I say again the wobble and the engine problem are NOT linked, handling issues are what I've told you and are SPEED related. The fact the engine wont rev beyond a certain rev range is neither here or there, the fact it wont pull 3/4 gear is because of loading which is mixture.  If the clutch slips i.e you stop accelerating but the engine stops revving, that's the question I asked you, I also asked if the bike was just slowing and the engine dying.  Both you've still not answered? 

I've also told you what the engine issues to look for and what the handling/wobble is caused by, I also asked you where in the world are you? This I did as your command of English isn't that good so it's possible English isn't your first language and allowances would be made.   

so stop asking me the same questions

It's very simple fella if you come o to his forum asking for help you'll get it but YOU hae to read the questions fully and answer them correctly, for anyone to be able to help you.  From what you've said it sounds like the bike you've got is a bit of a dog and could well have many issues.

Now if you think anyone can just tell you what is wrong with the information you've given you're very mistaken, check what I've told you or give us/me better and more information.