09-06-17, 02:17 PM
speedo replacement advice ---
if you see the cheap chinese copy of the koso clocks steer clear - i have one and it looks ok and speedo works
but rev counter is a bit slow and the fuel guage wont work i have full and one bar less than full
go the extra mile and buy the proper koso it will last longer comes with better instalation instructions and has all the settings you will ever need
the wiring is actually fairly simple once your in there just have a good look at the wiring diagram for a 12v that goes into the clocks then feeds down to the speedo sensor make sure that wire down has 12v feed to it to get it to work
you could use the magnet sensor instead but oem sensor must remain for the ecu to operate correctly so just encorperate the oem into aftermarket speedo
if you see the cheap chinese copy of the koso clocks steer clear - i have one and it looks ok and speedo works
but rev counter is a bit slow and the fuel guage wont work i have full and one bar less than full
go the extra mile and buy the proper koso it will last longer comes with better instalation instructions and has all the settings you will ever need
the wiring is actually fairly simple once your in there just have a good look at the wiring diagram for a 12v that goes into the clocks then feeds down to the speedo sensor make sure that wire down has 12v feed to it to get it to work
you could use the magnet sensor instead but oem sensor must remain for the ecu to operate correctly so just encorperate the oem into aftermarket speedo
riding this that and the other
vloggin some bits - https://www.youtube.com/channel/UCvWtJO9...R9RNHx72UQ
https://www.instagram.com/disorderly_punk_yt/
vloggin some bits - https://www.youtube.com/channel/UCvWtJO9...R9RNHx72UQ
https://www.instagram.com/disorderly_punk_yt/