08-06-17, 08:37 AM
Hi Devilsyam,
I have the r6 shock mod but have also just had ktec springs matched to my weight and 10w oil as recommended by ktec fitted. Forks are 10mm through yolks. I am 14 stone in kit. The bike is running on Dunlop Roadsmart 3's tyre pressures front 35 and rear 39. Since fitting the forks the bike has developed a high speed weave. This is during hard acceleration above 9k and towards the silly end of the speedo! Below that in general use or short shifting its fine.Any suggestions on the fork and rear suspension set up please? Sag seems correct. All usual suspect bearings have been checked and fine. Cheers
I have the r6 shock mod but have also just had ktec springs matched to my weight and 10w oil as recommended by ktec fitted. Forks are 10mm through yolks. I am 14 stone in kit. The bike is running on Dunlop Roadsmart 3's tyre pressures front 35 and rear 39. Since fitting the forks the bike has developed a high speed weave. This is during hard acceleration above 9k and towards the silly end of the speedo! Below that in general use or short shifting its fine.Any suggestions on the fork and rear suspension set up please? Sag seems correct. All usual suspect bearings have been checked and fine. Cheers