07-06-17, 07:34 PM
Well Ive done it, was a piece of piss really.
On centre stand, jack up under the down pipes so front wheel just off floor.
Loosen off top yoke fork pinch bolts. Take top nut off, 27mm socket, remove lock washer, separate the two slotted nuts, tighten up the lower one a bit, reassemble and test.
On centre stand, jack up under the down pipes so front wheel just off floor.
Loosen off top yoke fork pinch bolts. Take top nut off, 27mm socket, remove lock washer, separate the two slotted nuts, tighten up the lower one a bit, reassemble and test.