Loosing power ???

[darrsi]

[quote author=maxzer1500 link=topic=22665.msg261530#msg261530 date=1495958324]
[quote author=Fazer99 link=topic=22665.msg261506#msg261506 date=1495918970]
I've got a few T25 Torx Allen bits but not security ones so I might try drilling a little hole in one of them so it will fit.


Looks like my Sunday is going to be another day in the garage ?

You can simply use a punch or similar to snap off the central pin and use the Torx bit as is.
[/quote]


didn't think of that as I thought they were designed to be strong enough to not be tampered with in that way.
[/quote]


I wouldn't go down that route if truth be told, that might not end too well.


Word of warning as well, if the needle hits 10,000rpm, DON'T TURN THE IGNITION OFF.
The needle will be be leaning to the right and gravity will simply make it drop clockwise.
Then you"ll have to take the clocks apart to move it back round to zero.
Just start the engine and it will move back itself to the correct side.