Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MOT Fail, not sure....
#9
OK so no luck so far....steps taken...


1. Checked with a Multimeter the continuity and resistance of all the return leads for the Indicators and the lights, all show as ok i.e. 0.6-1 Ohms....and all have continuity...
2. Unplugged and re-plugged all connectors in...


To re-describe the issue, if i turn on an indicator, regardless of which one, then the lights in the headlight unit glow with the same frequency as the indicator strobing.


Its not just the parking light but all the lights i.e. dipped beam as well....


Little stumped...any more tests or things to consider


Have also plugged and re-plugged the flasher relay and also the headlight loom under the tank...

Reply


Messages In This Thread
MOT Fail, not sure.... - by anutz - 01-05-17, 02:32 PM
Re: MOT Fail, not sure.... - by slappy - 01-05-17, 02:41 PM
Re: MOT Fail, not sure.... - by anutz - 01-05-17, 06:44 PM
Re: MOT Fail, not sure.... - by BBROWN1664 - 01-05-17, 08:37 PM
Re: MOT Fail, not sure.... - by anutz - 01-05-17, 09:18 PM
Re: MOT Fail, not sure.... - by crickleymal - 02-05-17, 09:49 AM
Re: MOT Fail, not sure.... - by anutz - 02-05-17, 09:53 AM
Re: MOT Fail, not sure.... - by anutz - 06-05-17, 04:58 PM
Re: MOT Fail, not sure.... - by JoeyMcEssex - 06-05-17, 05:57 PM
Re: MOT Fail, not sure.... - by anutz - 30-09-17, 10:07 PM
Re: MOT Fail, not sure.... - by Hugh Mungus - 01-10-17, 04:15 AM
Re: MOT Fail, not sure.... - by anutz - 01-10-17, 08:58 AM
Re: MOT Fail, not sure.... - by darrsi - 01-10-17, 09:52 AM
Re: MOT Fail, not sure.... - by tommyardin - 01-10-17, 05:44 PM
Re: MOT Fail, not sure.... - by robby boy - 01-10-17, 07:38 PM
Re: MOT Fail, not sure.... - by tommyardin - 01-10-17, 11:15 PM
Re: MOT Fail, not sure.... - by Hugh Mungus - 02-10-17, 01:01 PM
Re: MOT Fail, not sure.... - by His Dudeness - 02-10-17, 05:10 PM
Re: MOT Fail, not sure.... - by anutz - 02-10-17, 06:28 PM
Re: MOT Fail, not sure.... - by His Dudeness - 02-10-17, 07:30 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)