08-04-17, 06:00 PM
Hi Ian.
Valve clearances are 0.11-0.20 for the inlet and 0.21-0.30 for the exhaust.
There shouldn't be daylight visible between the cams and the chain. If the chain is loose then it'll ride up the cam sprockets, but it might not tighten fully straight away if you've had the tensioner off. I had mine in bits yesterday and it took a little while for the chain to stop rattling when I put it back together.
Andy.
Valve clearances are 0.11-0.20 for the inlet and 0.21-0.30 for the exhaust.
There shouldn't be daylight visible between the cams and the chain. If the chain is loose then it'll ride up the cam sprockets, but it might not tighten fully straight away if you've had the tensioner off. I had mine in bits yesterday and it took a little while for the chain to stop rattling when I put it back together.
Andy.