Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Clutch won't fully engage when hot
#9
(03-04-17, 12:32 AM)Graham53 link Wrote: did your engine fan cut in when it started to warm up ? The oil is cooled at the oil cooler from engine coolant via the rad so the oil may have been getting too hot, further to that what's the level of your coolant and when was it last changed old coolant is less efficient , additionally how old is the oil? What's the oil level? Is it  low , spot on or high ? And is it of the correct grade, being a wet clutch I would say it's down to oil overheating somehow remember oil doesn't just lubricate it cools the engine as well and the older it is the less efficiently it does both,  I could be wrong but as you say it's fine when it cools down somethings causing the overheating.
BTW What's the UK motorcycle theft protest ???


Hi again Graham


We (UKMTP) are a motorcycle theft awareness group looking to reduce motorcycle theft in the UK. We are passionately pushing for changes in laws such as stricter sentences for major motorcycle thieves and gang members, we are fully behind police forces to be given more rights and protection to chase and knock off stolen bikes without fear of being prosecuted themselves for potentially injuring these thieves on stolen bikes. We also look to put pressure on councils and businesses for more attention and security put into motorcycle parking in order to make motorcycles harder to steal.


Please feel free to check us out and join us on Facebook, we have nearly 7000 members:
https://www.facebook.com/groups/ukmtp/?ref=br_tf


and Twitter:
https://twitter.com/UkTheft
 
Reply


Messages In This Thread
Re: Clutch won't fully engage when hot - by daviee - 03-04-17, 07:32 PM
Re: Clutch won't fully engage when hot - by Grant1Shepherd - 03-04-17, 09:58 PM

Forum Jump:


Users browsing this thread: