16-03-17, 06:44 PM
just had a thought - did you do a compression check on the replacement engine?
if the inlet valves are not sealing it can positive pressurise the carb venturi tube during the compression cycle causing pressure in the float bowl and pushing the fuel through the breather
that would explain no fuel in 1+2 therefore not firing and would explain why fuel only exits breather when running
also its a lot easier to compression check than to remove carbs
think about it and let me know as it is mearly a theory but in my head a sound one
if the inlet valves are not sealing it can positive pressurise the carb venturi tube during the compression cycle causing pressure in the float bowl and pushing the fuel through the breather
that would explain no fuel in 1+2 therefore not firing and would explain why fuel only exits breather when running
also its a lot easier to compression check than to remove carbs
think about it and let me know as it is mearly a theory but in my head a sound one
riding this that and the other
vloggin some bits - https://www.youtube.com/channel/UCvWtJO9...R9RNHx72UQ
https://www.instagram.com/disorderly_punk_yt/
vloggin some bits - https://www.youtube.com/channel/UCvWtJO9...R9RNHx72UQ
https://www.instagram.com/disorderly_punk_yt/