05-03-17, 02:27 PM
(04-03-17, 04:16 PM)Falcon 269 link Wrote: I did it by fitting the forks in temporarily, tightening the lower yoke clamp bolts but leaving the top yoke clamp bolts just nipped up enough to establish a parallelogram, if you follow my drift? The top clamp has to allow the fork legs to move through a fraction as the yoke nut is torqued up.
I see now, of course the yoke has to move down with the nut as you torque it up. The top set of pinch bolts need to be loose enough to let this happen -and loose enough to let the parallelogram 'true up'.