15-02-17, 12:03 AM
(This post was last modified: 15-02-17, 12:05 AM by tommyardin.)
(14-02-17, 09:57 PM)Rob R link Wrote: I went with 2 lines- fewer joints, fewer opportunities to leak.
Rob
I'm with Rob I went the two front pipe route, as stated less joints to leak, joint at the master cylinder single joint on each calliper = 3 joints. Master cylinder joint is a single piggy back joint.
As opposed to joint at master cylinder, joint at feed into the yoke manifold two joints out of manifold one joint on each calliper = six joints