14-12-16, 10:16 PM
If the side stand switch has been bypassed the position of the stand shouldn't have any effect on the bike. All that side stand switch is doing is connecting a wire together when the stand is up. By bypassing it you've permanently joined the wire so the position of the stand should now have no effect. That's why bypassing it is a bit dodgy, you can ride off with your stand down. Is you side stand still connected to the main loom? If it is then disconnect it and you can use two spade terminals on a loop of wire to bypass it. It's a bodge but it works
http://i183.photobucket.com/albums/x237/...0-1807.jpg
http://i183.photobucket.com/albums/x237/...0-1807.jpg