30-11-16, 11:33 AM
If neither the pass switch on the left bar or the main beam switch on the right bar are working, you need to look at common elements.
The bulb may have failed but in a way where it sometimes allows the bits of the element to rejoin.
Nothing to lose by trying a new bulb but maybe several hours of pulling unbroken wires around to save if you do.
Many years as an engineer has taught me to check the simple stuff first.
The bulb may have failed but in a way where it sometimes allows the bits of the element to rejoin.
Nothing to lose by trying a new bulb but maybe several hours of pulling unbroken wires around to save if you do.
Many years as an engineer has taught me to check the simple stuff first.
Another ex-Fazer rider that is a foccer again