Updating lights 04 fazer thou

[b1k3rdude]

• Dunno why they changed the lights so you only get one dipped beam on a later fazer,
  
• halogens?
  
• I don't want the arse ache or cost of HID...
  
• LED replacement H4 bulbs mentioned by VNA
  

• I assume you referring to a gen2 - I would hazard a guess that the wiring is the same as it is on the gen 1. You just tap of the working dip beam lead (at the front loom connector end) and wire that to a right-angle  spade connector to fit into the 3-pin H4 connector. Its a very easy job that take you no longer than hour to do. The alternator is rated to power both headlights inspite of the bullshit EU bollox and the fuse and wire should easily cope.
  
• Despite what everyone has said about better bulbs, unfortunately its a complete waste of time - as its only a little bit better. The £10-20 you spend on a these so called better bulbs is better spent else where -
  
• The issue is pretty much all HID kits dont have the correct beam pattern for the H4 hi/lo based head light units. But there is another option, LED spot lights - http://www.bikevis.com/product/bikevis-c...ng-lights/
  
• IMHO these always come from China and never really work - but I am happy to be proven wrong. The market sorley needs a LED replacement fore the H4 bulb/fitting.
  

I have a set ob both my fazer and my bandit and both sets are over 2yrs old and still going strong. They also kick out the same light as a single 35W HID and are fully legal.

On the fazer:



Light spread on the bandit: