01-11-16, 01:36 PM
Not too difficult to do, done it a few times now, trying different bulbs.
No need to remove the fairing, just the screen. With that out you can unplug the wiring going into the back, and get the access you need to the 3x 10mm nuts holding the cluster to the frame. With the cluster out, theres about 8 cross head screws to open it up. There are 3 bulb holders that 1/4 turn to remove, then you just pull the bulb out and put the new one in. I recommend that you plug the harness back in and test all the bulbs before you re-assemble anything.
No need to remove the fairing, just the screen. With that out you can unplug the wiring going into the back, and get the access you need to the 3x 10mm nuts holding the cluster to the frame. With the cluster out, theres about 8 cross head screws to open it up. There are 3 bulb holders that 1/4 turn to remove, then you just pull the bulb out and put the new one in. I recommend that you plug the harness back in and test all the bulbs before you re-assemble anything.
![[Image: 138790.png]](http://mefi.us/images/fuelly/smallsig-uk/138790.png)