16-10-16, 04:22 PM
Now for something different friends (=I can't yet find it on topic search).
I've purchased a FZS600 (2000) that has 'Plates fitted restricting the diameter of the inlet manifolds' last year as the previous owner then had an A2 licence.
I have found this quite useful so far as I am first giving the machine a thorough service, tyres, chain and sprockets etc; but would want to remove the restriction at some time.
Either way, I'm generally interested in the topic (and of course realise that less suck = less bang = less power at the wheel) and wondered if anyone else has had these installed (I have the certificate) and has anyone removed them themselves. If so, can the plates be removed without removing the carbs completely.
(I have noted that the person who did this work refitted the tank mounting bracket and spacer rubber incorrectly. I wonder what else might be wrong.)
[/size]
[/size]Thanks.
I've purchased a FZS600 (2000) that has 'Plates fitted restricting the diameter of the inlet manifolds' last year as the previous owner then had an A2 licence.
I have found this quite useful so far as I am first giving the machine a thorough service, tyres, chain and sprockets etc; but would want to remove the restriction at some time.
Either way, I'm generally interested in the topic (and of course realise that less suck = less bang = less power at the wheel) and wondered if anyone else has had these installed (I have the certificate) and has anyone removed them themselves. If so, can the plates be removed without removing the carbs completely.
(I have noted that the person who did this work refitted the tank mounting bracket and spacer rubber incorrectly. I wonder what else might be wrong.)
[/size]
[/size]Thanks.