10-10-16, 03:13 PM
The bike has been running fine since I changed the power pole connectors. These have been inspected and they are tight.
The existing regulator was checked and found to test out OK. It was tested by checking each set of white wires through first the red (then reversed) and then the black (then reversed) all as shown on a you tube clip posted by a company selling rectifiers etc. I bought a new rectifier anyway and fitted that - Exactly the same - not charging.
Battery is about 6 months old - I have already tested the battery, left on the bike for 24 hours after being fully charged and showing 12.6V
The test on the stator (I called it a generator) was the static test and it showed 0.3 ohms between all of the white wires.
What should I check out next please?
The existing regulator was checked and found to test out OK. It was tested by checking each set of white wires through first the red (then reversed) and then the black (then reversed) all as shown on a you tube clip posted by a company selling rectifiers etc. I bought a new rectifier anyway and fitted that - Exactly the same - not charging.
Battery is about 6 months old - I have already tested the battery, left on the bike for 24 hours after being fully charged and showing 12.6V
The test on the stator (I called it a generator) was the static test and it showed 0.3 ohms between all of the white wires.
What should I check out next please?