25-09-16, 12:32 PM
(24-09-16, 11:03 AM)Grib link Wrote: There is a fuse for the live feed. If it hasn't blown then there is a section of the wiring loom on the LHS of the frame that is wrapped in a plastic sleeve with a self adhesive seam down the side which could be your problem.
This sleeve has several spliced joints in the cables inside it, and on my bike water had got inside the sleeve and the splice in the live feed to the clocks had corroded through. I cleaned the wires and soldered the joint back together.
But was this done because it wasn't working at all, or not holding the setting when the engine is switched off?
More people are born because of alcohol than will ever die from it.