31-08-16, 12:20 PM
Hi Marc
I had a similar issue recently with my Gen 1 Fazer 1000 in that it would cut out after starting when pulling away and also when filtering and especially cornering at below 2000 revs. (Gave me a few frights)
My mechanic friend went through all the carb and jet cleaning and balancing procedure with no improvement, eventually deciding that it was an electrical problem.
After much more head scratching and heating/cooling disconnecting and reconnecting he discovered the ECU or CDi Igniter unit as he called it was faulty and after replacing that with one from eBay the bike has run perfectly.
Just something to keep in mind if you are unable to resolve the problem.
Cheers
Dave...
I had a similar issue recently with my Gen 1 Fazer 1000 in that it would cut out after starting when pulling away and also when filtering and especially cornering at below 2000 revs. (Gave me a few frights)
My mechanic friend went through all the carb and jet cleaning and balancing procedure with no improvement, eventually deciding that it was an electrical problem.
After much more head scratching and heating/cooling disconnecting and reconnecting he discovered the ECU or CDi Igniter unit as he called it was faulty and after replacing that with one from eBay the bike has run perfectly.
Just something to keep in mind if you are unable to resolve the problem.
Cheers
Dave...