Ok so what am I doing wrong, positioned the new pressure plate so that it could not move when pressed against the clutch plates,
Did the spring bolts up as deefer said and at each stage I tried
The clutch lever to Make sure it was working.
Put the cover back on started the bike up and nothing, when I put the bike in gear with the clutch lever pulled all the way in the rear wheel is still turning under power and that is with the new clutch cable adjusted all the way out.
I soaked the plates at the weekend for around 4 to5 hours, so have stripped it all out and am getting going to soak them overnight.
Have missed something.
Cheers all
Did the spring bolts up as deefer said and at each stage I tried
The clutch lever to Make sure it was working.
Put the cover back on started the bike up and nothing, when I put the bike in gear with the clutch lever pulled all the way in the rear wheel is still turning under power and that is with the new clutch cable adjusted all the way out.
I soaked the plates at the weekend for around 4 to5 hours, so have stripped it all out and am getting going to soak them overnight.
Have missed something.
Cheers all