|
Bleeding back brakes
|
02-05-16, 09:34 PM
It can be common to end up with a big air bubble at the banjo bolt at the master cylinder. You can try slackening the banjo bolt to let the bubble out, and then wipe up the spilt brake fluid or temporarily take the caliper off the bracket and tie it up so it's higher than the master cylinder and bleed it there making sure you put something between the brake pads so you don't push the brake pistons out
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Bleeding back brakes - by shieldr - 02-05-16, 09:02 PM
Re: Bleeding back brakes - by Jules-C - 02-05-16, 09:34 PM
Re: Bleeding back brakes - by shieldr - 03-05-16, 06:13 AM
Re: Bleeding back brakes - by paulchucky - 03-05-16, 07:18 AM
Re: Bleeding back brakes - by sinto607276 - 03-05-16, 10:46 AM
Re: Bleeding back brakes - by shieldr - 03-05-16, 01:37 PM
Re: Bleeding back brakes - by Arfa - 03-05-16, 02:39 PM
Re: Bleeding back brakes - by shieldr - 03-05-16, 08:06 PM
Re: Bleeding back brakes - by sinto607276 - 03-05-16, 08:41 PM
Re: Bleeding back brakes - by Jules-C - 03-05-16, 09:14 PM
|
