front sprocket nut

[unfazed]

Chain slack its ok
IT'S still 2 lines to limit. It's better when I changed sprockets.
I will check that 150mm when have time.
Thanks

The lines are not for the limit of the chain they are only for lining up the rear wheel to ensure it is in straight., :eek

Fazer 600 Chains on standard sprockets are well worn long before the adjustment lines get down too two showing. :rolleyes

Any chain on standard sprockets that far back on the adjusters is a failure waiting to happen. :eek

Ignore the numbers for chain slack, when on the centre stand, Engine off, rotate the wheel until you can feel the tightest section of the chain. Now push the chain up to the swinging arm, it should just touch the rubber protector on the swinging arm without too much force.
If it does not touch the rubber protector the chain is to tight.  :thumbup