26-03-16, 02:49 PM
(This post was last modified: 26-03-16, 02:59 PM by Motopsycho87.)
Right, so changed the sparks plugs, ignition coils and leads. Still no different. There was a lot of corrosion everywhere, but nothing obvious.
So now my next possible thought is the carbs. What can go all of a sudden and stop a cylinder running at high RPM? When I installed Ivan's I fitted new carb rubbers, everything was to spec, and it ran perfect. All of a sudden, one cylinder seems to be not firing, but only at high RPM, its perfectly smooth at low revs...
Cleaned out that 'white connector' with contact cleaner too, then slapped with white grease and re-assembled. Nothing.
Only thing that makes sense atm is a blocked main jet... in which must be a big lump of shit to achieve that!
So now my next possible thought is the carbs. What can go all of a sudden and stop a cylinder running at high RPM? When I installed Ivan's I fitted new carb rubbers, everything was to spec, and it ran perfect. All of a sudden, one cylinder seems to be not firing, but only at high RPM, its perfectly smooth at low revs...
Cleaned out that 'white connector' with contact cleaner too, then slapped with white grease and re-assembled. Nothing.
Only thing that makes sense atm is a blocked main jet... in which must be a big lump of shit to achieve that!